EUL-THW-LED
LED Airport Runway Threshold Wing-bar Light
Compliance with Standards
CAAC:AC-137-CA-2015-01 & 03
SAC: GB/T 7256
ICAO: Annex 14，Volume I
IEC: TS 61827
FAA: AC 150/5345-46 & EB NO.67
NATO: STANAG 3316
Application/Use
Airport Runway threshold wing-bar light
Features
LED airport runway threshold wing-bar light is featured by long life, effective energy saving, maintenance-free, which brings enormous economic benefits to customer
Proprietary optical design to ensure full lighting spot when the glass is partially obscured
Strict LED color management to ensure premium color consistency
Consistent dimming curve with halogen lamp fixture, complying with FAA standards
Proprietary driving circuit and thermal management solution, which greatly improves the reliability and service life of light fixture
Power factor above 0.9, which minimizes the power network interference
Optional function of single lamp failure detection, which enables the light to be open as halogen lamp once LED fails
Compact structure and attractive appearance, with small windward area and strong wind resistance capability
The main body is made of aluminum alloy with anti-corrosion surface treatment, all fasteners are made of stainless steel, suitable for various harsh environment applications
High-precision parts and components machining to ensure all dimensional quality and accuracy
Forged frangible device with precise machining, complying with FAA standards, ensuring good stability and reliability
IP65-grade ingress protection of the fixture, keep interior from dust
The fixture can be connected with one or two-inch extension pole, convenient installation, firmness and reliability
The calibrator can be directly mounted to the body with convenient and precise installation and calibration
Interchangeable, modular-designed components, applicable for all kinds of elevated unidirectional lights(LED type), which effectively cuts down the inventories.
Structure
| 1. front cover 2. optical cover 3. optical cover gasket 4. LED lamp assy 5. light body 6.transformer | 7. driver assy 8. light body gasket 9. rear cover 10. front adjusting screw 11. washer 12.hinge pin | 13. rear adjusting screw 14. side locking screw 15. set screw 16. body base 17.waterproof gland 18. plug |
Ordering Information
Please provide detailed installation info while ordering, spare parts and accessories should be separately ordered with specific order no.
Installation
 |  |
Fig 1. On 12” deep base | Fig 2. Flange direct mount |
* Please find detailed information in installation manual
Specifications
Light source: Green LED particles
Power: 36 VA
Power factor: ≥0.9
IP grade：IP65
Photometric Data
EUL-THW-LED (Green), ICAO Figure A2-4
Application | Main Beam | Color | Required min avg. cd | Actual | ||
H | V | |||||
EUL-THW | ICAO | ±7° | 0.5°—10.5° | Green | 10000 | 12265 |
Packing Data
1 light
Size: 220×220×265 mm³
Unit net weight: 3.5 kg
Gross weight: 4.0 kg
Spare Parts
Struc No. | Part Name | Orde r No. | Description |
2 | Optical cover | 31108 | Front Glass JJD |
3 | Optical Cover Gasket | 41110 | Front Cover sealing components Rubber strip |
4 | LED Lamp Assy | 979242- 12-G | LED Lamp 103 (12-O) Green |
6 | Isolation Transformer | 79125 | Ring Form Isolation Transformer (35W) |
8 | Lamp Body Gasket | 41154 | O-ring 102*3 |
17 | Waterproof Gland | 48401 | Metal Waterproof Gland MG20×1.5 |
18 | Style 6 Plug | HT70603 | Secondary Cable Connector-A6 Double core plug(Flat Type)-High Temperature resistance |
Accessories
Description | Order No. | |
1 | Flange (10 inches) | FL-10 |
2 | Flange (12 inches) G2 Screw | FL-12-X-G2 |
3 | Frangible Coupling (2 inches) | FC-02 |
4 | Isolation Transformer (45 W) | ITF-045-066 |
5 | Secondary Calbe connector style 7 | REC 7 |
6 | Corrector | 954211 |
7 | Isolation Transformer Box | TJB-12 |
Hot Tags: airport runway threshold wing-bar, China, suppliers, manufacturers, factory, customized, cheap, low price, taxiway stop light, Halogen runway edge light, Airport Runway Edge Light, Heliport windsock, Airport Crossbar Light, Elevated Obstacle Light