Single Girder Overhead Crane for Steel Michining Workshop

[[MetaDescription]]

RCLS-08-LED

LED airport Runway Centerline Light

Compliance with Standards

CAAC: AC-137-CA-2015-01

CAAC: AC-137-CA-2015-03

SAC: GB/T 7256

ICAO: Annex 14，Volume I

IEC: TS 61827

FAA: AC 150/5345-46 FAA: EB NO.67

NATO: STANAG 3316

Application/Use

Airport Runway

centerline light

Features

LED airport runway centerline light is featured by long life, effective energy saving, maintenance

-free, which brings enormous economic benefits

Proprietary prism structural design and manufacturing process to ensure excellent optical performance

Strict LED color management to ensure premium color consistency

Consistent dimming curve with halogen lamp fixture, complying with FAA standards

Proprietary driving circuit and thermal management solution, which greatly improves the reliability and service life of light fixture

Power factor above 0.9, minimizing the power network interference

Optional function of single lamp failure detection, which enables the light to be open as halogen lamp once LED fails

Specially-designed structure, protruding only 6.35mm above finish grade

Upper cover with flat out-light surface to prevent from water buildup and ensure high luminous efficiency

Upper cover with equal-strength design and forging craft, which has premium mechanical, barrier capacity, and shock resistance ability

Smooth upper cover without sharp edge to prevent aircraft tires from damaging

Main body of lighting fixture is made of high thermal conductive aluminum alloy, which ensures good heat dissipation performance

Main structure made of corrosion-resistant aluminum alloy with special anodizing treatment, all fasteners are made of stainless steel, suitable for harsh environment application

High-precision parts machining to ensure all dimensional quality and precision

IP68 Ingress protection-grade, that can withstand inner pressure of up to 138kpa or water pressure generated from aircrafts’ impact on the optical window

Optional dual plug that permits bilateral control of the two-way light and intelligent loop control

Interchangeable, modular-designed components, applicable for all series of 8-inch LED in-pavement runway lights(6 mm), which effectively cuts down the inventories.

Ordering Information

Please provide detailed installation info while ordering, spare parts and accessories should be separately ordered with specific order no.

Installation

Fig 1 On 8” shallow base
Fig 2. On 12” shallow base w/ 12”/8” adapter ring
Fig 3. On 12” deep base w/ 12”/8” adapter ring

Please find detailed information in installation manual

Structure

1. upper cover 2. thermal switch 3. prism gasket sleeve 4. prism 5. LED lamp assy 6. prism gasket 7. prism pressing bracket 8. light body gasket 9. lighting fixture gasket 10.inner cover assy

Specifications

Power: 24VA(bi-directional) 18VA(uni-directional)

Power Factor: ≥ 0.9

Photometric Data

RCLS-08-LED (White), ICAO Figure A2-7, FAA L-850A

RCLS-08-LED (Red), ICAO Figure A2-7, FAA L-850A

Packing Data

Spare Parts

Accessories

[[ContDescription]]