Solar Power LED Traffic Warning Beacon Magnet Base LED Strobe Light

[[MetaDescription]]

Product Specification

FLYLIGHT has lighting options for every type of helipad in every type of environment, like heliport beacon light, heliport perimeter light, heliport inset light, etc.

FLYLIGHT Heliports has a full line of LED and NVG Compatible helipad lights to fit your needs. All of our products are made from the highest quality materials and are compliant to industry standards, like ICAO,FAA,CAAC,etc. Our lighting is fully warrantied and all of our options are manufactured by FLYLIGHT Heliports at our facilities, located here, in Shanghai city, China. Our customers can expect quick, easy service and a fast response to any lighting questions you may have about our lighting fixtures.

The correct helipad lighting is a key safety feature for your helipad or helideck. We can provide everything you need, from perimeter lights to windcone assemblies to remote lighting units. We even offer battery powered options for rapid deployment.

All of our options are top of the line LED units and we offer several options for power connections beyond the standard application, including solar and low voltage. Our designers and engineers continue to push the industry to try to keep up with our technological advances in heliport lighting. Let FLYLIGHT Heliports help you design your helipad or helideck lighting today!

All products are adopting cutting edge technology LED sources, to make long life expectancy, as long as 10 years long. There are 3 types of power supply available for the helipad:

1. 110~220V AC;

2. 24V, 48V DC, with solar panel, li battery inside the lamps;

3. Portable lights, DC type, with charging ports, no solar panels, with li battery inside;

Portable lights have IR mode optional, can be visible at deep night, this function is especially useful for military heliport use.

Heliport Beacon light

A heliport beacon should be provided at a heliport where:

a) long-range visual guidance is considered necessary and is not provided by other visual means; or
b) identification of the heliport is difficult due to surrounding lights

The heliport beacon shall be located on or adjacent to the heliport preferably at an elevated position and so that it does not dazzle a pilot at short range.
The heliport beacon emit repeated series of equispaced short duration white flashes.
The light from the beacon is show at all angels of azimuth.

The heliport apron light beacon is a light beacon that indicates the location of the heliport apron and is used to guide the location of the apron for aviation pilots.

The heliport apron lights are marked with white flashes, 20-30 times per minute. The flashing of the lamps should not be dazzling to the pilots, and it should be ensured that the aviation pilots can see the beacon at any angle, so as to clearly define the location of the apron.

The heliport apron beacon can be divided into: L-801A medium-intensity airport beacon, L-801S medium-intensity seaplane base beacon, L-802A high-intensity airport beacon, L-802S high-intensity seaplane base beacon , L-810X1A low-intensity airport beacon, L-80X1H heliport beacon, L-80X1S low-intensity seaplane base beacon. According to the specific installation environment and installation requirements, choose different types of lights for installation.

The heliport beacon (also known as the heliport apron beacon) is suitable for the apron of the flat heliport or the apron of the high-rise heliport. It needs to be installed in a location where the apron is not blocked, and the pilots must be able to see 360 degrees so that the heliport apron location can be quickly identified.

Scope

This specification details Federal Aviation Administration requirements for airport light beacons at civil airports, military airports, seaplane bases, and heliports.

Classification

L-801H Medium intensity heliport beacon

L-802H High intensity heliport beacon

Flash Rate

L-801H     33 to 39 flashes per minute (fpm)

L-802H 33 to 39 flashes per minute (fpm)

Flash Duration

a. The duration of individual flashes must be from 75 to 300 milliseconds (ms).

b. The requirement above may be met in capacitor discharge-type beacons by a series of rapid successive flashes which appear to the viewer to be one uninterrupted flash.

Signal Format

a. Airport beacons must provide the following signal colors:

L-801H & L-802H Alternate white, green, and yellow

Input Voltage

The airport beacons must be designed to operate from a standard line voltage below 600 volts, at a tolerance of ±10 percent, 60 Hertz line frequency, alternating current.

1 Technical Parameters

1.1 Technical Parameters

The following parameters are obtained under normal temperature test. (25℃)

2. Characteristics of Lamp

The product can send out an omnidirectional white light signal at night or during the day with low visibility to clearly indicate the location of the helipad.

Features:

1. White light, horizontal 360º omnidirectional light;

2. Imported LED, low light decay, long life, high efficiency and energy saving;

3. Special prism structure and manufacturing process, excellent optical effect;

4. Aluminum alloy structure, light weight, corrosion resistance;

5. Simple installation and maintenance-free;

6. Standardized optical design, high photoelectric conversion efficiency;

7. It has impact resistance, lightning protection, sun resistance, rain and snow resistance, and resistance to typhoons, hail and other severe weather;

8. The lampshade is made of PC material, which is resistant to corrosion and UV.

9. Low power consumption, professional flash switch.

10. Corrosion resistance, anti-ultraviolet.

11. With lightning protection function.

12. This product is self-developed, with self-patent for optics and new product experiment;

13. The housing adopts integrated die-casting aluminium, with super performance of heat sinking and sealing;

14. The optical module of this product adopts reflex housing, high efficiency of light gathering, no extra scattered light pollution;

15. This product adopts high power Led light source, can operate continuously over 50000H, energy saving, environment protection, long life;

3. Installation

a) Please read carefully the product specification before using the driver to make sure the operation environment can meet the requirement as per the specification.

b) While connecting the tube to the power, please make sure the switch is “off”.

c) Do not disassemble the lamp by yourself.

4. Maintenance

4.1 keep every screw in tight

4.2 keep the light OFF when not using

5. Standard

5.1 Heliport Beacon Light, annex 14, volume 2, 3^rd edition, “Aerodromes: Heliports”, July 2009, table 6.3.

Why choose Flylight?

With more than 4 years’ experience in aviation obstruction lights, Flylight dedicates to lead the aviation industry in China,

With our strong R&D team of photometric & chromatic and our extensive background in aviation obstruction lights and monitoring, No worries! We assure you that you can find exactly the right solution for your application.

· On-site checking, measuring, installation, on-site maintenance and repairs and lighting inspections via our field services team.

· Trainings for obstruction lights, lighting system, control system, monitoring system, etc.

· Flylight offers Operational Flexibility. Increases Durability. Helideck Accessories. Prohibited Landing Flags. Custom Made. Certified & Tested. Helideck Flags. Durable black polyester. Long Product Lifetime. Trusted by Top Companies. International Flags. Increase Safety.

Flylight,a Chinese manufacturer of heliport Lights, offers a large range of solutions, diurnal and/or nocturnal, in order to fit the requirements of the International Civil Aviation Organization (ICAO).

Thanks to our experience, our products have been installed all over the world within different fields of applications: Pylons, Chimneys, Civil Engineering Structures, High-Voltage Lines, Wind Turbines, Buildings, Cranes, Airports and Heliports.

ICAO compliant manufacturer, more than 4 years of experience, references worldwide. High quality LED heliport lights for all kinds of airports, heliports, military airports, etc.

How to purchase from Flylight?

If you are interested in our heliport lights, please feel free to contact us by:

Contact: XIAOYANG SHE(MR.)

Email: info@shflylight.com; shflylight@gmail.com

Tel/Mobile/ Whatsapp: +86 13825184858

Wechat: 810502829

About shipping

Normally for heliport lights, ship by air, if Qty is in big scales, ship by sea;

Lead time: QTY<10ea, have stock, can be shipped out immediately;

QTY>10ea, 10~15days;

QTY>100ea, 25 days;

Shipping by air: 7~10 days;

By sea: 15~35 days;

Warranty

All series of heliport lights include spare parts for heliport beacon light: 1 year warranty

[[ContDescription]]