What are the quality requirements for aviation obstruction lights

What are the quality requirements for aviation obstruction lights

For aviation obstruction lights, what are the general quality requirements? The good aviation obstruction lights are produced after a series of tests and according to the requirements of the use environment. What are the quality requirements for aviation obstruction lights?

　　 1. The shade of the aviation obstruction light cannot be broken. When directly hitting the lampshade with a hammer, if there is chipping, then it can be known that the lampshade has poor impact resistance, poor UV resistance and weather resistance. If this kind of aviation obstruction light is attacked by hail and long-distance transportation outdoors in the north, the light is prone to damage;

　　 2. Let the aviation obstruction light do a free fall experiment at a height of 1.5 meters, and the light can still work normally when the lamp is turned on;

　　 3. Use sulfuric acid or weak acid water directly on the outside of the lamp body to imitate acid rain and salt spray tests. If the external protective paint of the aviation obstruction light is of poor quality, the lamp body will be directly damaged. This kind of lamps has a very short service life in some heavily polluted areas or coastal areas in my country;

　　 Fourth, use 180V-260V power supply to directly connect the aviation obstruction light. This is mainly because the voltage is not stable enough in some parts of our country. If the lamp works normally, it means that the lamp has a wide operating voltage range and a long life. The poor quality lamps burn out within 20 minutes in the high voltage test. Using this experimental method, users can detect the quality of aviation obstruction lights in a short time.

　　It can be seen that the quality requirements for the use of aviation obstruction lights are different depending on the environment in which they are installed. The specific requirements for it are also different. When people buy aviation obstruction lights, they must also consider the installation environment. For example, some poor-quality aviation obstruction lights cannot be used after they are baked in an 85 degree oven for 30 minutes. It is suitable for use on the chimney.